Single-sided and double-sided adhesive aluminium production for the refrigeration industry
Single-sided adhesive aluminium is particularly suitable for joining aluminium-coated insulating panels and for coating air conditioning system pipes. Both single and double-sided aluminium are used for the distribution of the cold to operate refrigerators.
 |
Mono & biadhesive aluminium tape
FRONT
Aluminium, temper 0 alloy 1050, thickness 30 ÷ 350 μm
ADHESIVE
Hotmelt or solvent based Acrylic, grammage 10 ÷ 60 g/m²
LINER
Single side poly coated paper, on request we can use different
siliconised papers
USES
The 150-350 μm aluminum is used for the production of domestic and industrial refrigerator where it finds natural application between the refrigerator container and the cooling coil. It allows excellent thermal efficiency and high cost reduction compared to traditional systems used. The lower thickness are generally used for joining insulation panels made of aluminum cladding and for covering pipelines in the air conditioning systems. Aluminium has excellent strength aging and acts as a barrier to moisture and steam.
|
 |
Laminated aluminium
FRONT
Aluminum foil reinforced with polyester or polypropylene and surface treated with release to allow detachment from itself
ADHESIVE
Solvent based acrylic
USES
The lamination with polyester or polypropylene gives greater strength. It 's used for sealing and improves heat dissipation.
|
 |
Freezer tape
FRONT
Polyolefin copolymer film with surface treated with release to allow detachment from itself
ADHESIVE
Rubber based Syntetic
USES
It’s used for the sealing and protection of the coils of refrigeration
|
 |
Monoadhesive aluminium sheet
FRONT
Aluminium, temper 0 alloy 1050, thickness 30 ÷ 350 μm
ADHESIVE
Hotmelt or solvent based Acrylic, grammage 10 ÷ 60 g/m²
LINER
Single side poly coated paper, on request we can use different siliconised papers
USES
As the tape, it allows the improvement of thermal exchange and heat dissipation. The sheet is designed for manual applications.
|
 |
Biadhesive aluminium sheet
FRONT
Aluminium, temper 0 alloy 1050, thickness 30 ÷ 350 μm
ADHESIVE
Hotmelt or solvent based Acrylic, grammage 10 ÷ 60 g/m²
LINER
Single side poly coated paper, on request we can use different siliconised papers
USES
As the tape, it allows the improvement of thermal exchange and heat dissipation. The sheet is designed for manual applications.
|
 |
Mono & biadhesive aluminium die cutted sheet
FRONT
Aluminium, temper 0 alloy 1050, thickness 30 ÷ 350 μm
ADHESIVE
Hotmelt or solvent based Acrylic, grammage 10 ÷ 60 g/m²
LINER
Single side poly coated paper, on request we can use different siliconized papers
USES
It allows the improvement of thermal exchange and heat dissipation. The die cutting make it in the design required by the Customer.
|
| Type |
Structure |
Adhesive |
Size |
Uses |
| Mono & Biadhesive Aluminium |
Aluminium foil (30, 50, 80, 150 e 350 μm) with siliconised liner |
Solvent based Acrylic (temperature until –45°C) or Hotmelt (temperature until –30°C) |
Made into reel, width min 50mm and max 1000mm or made into sheet width max 1000mm die cutted too |
Thermal exchange and heat dissipation |
| Laminated Aluminium |
Aluminium foil (9 μm) with polyester film (23 μm) |
Solvent based Acrylic |
Made into reel, width min 25mm and max 50mm |
Sealing, thermal exchange and heat dissipation |
| Aluminium foil (30 μm) with polypropylene film (28 μm) |
Solvent based Acrylic |
Made into reel, width min 30mm and max 50mm |
| Freezer Tape |
LDPE-EVA Polyolefin copolymer film (total thickness 85 μm) |
Rubber based Syntetic |
Made into reel, width min 50mm and max 900mm |
Fixing, sealing and protection of the coils |